Contributor
To execute Linksys WiFi range extender at the workplace by login and setup method is simple. Linksys extender offers you high-speed internet in dead spots areas. To know the information about the extender login and setup process, read this entire page information briefly.
Grab Few Things To Do Extender Login Process
- There is a crucial requirement for an active internet connection.
- Grab a wifi device.
- Put the power plug off the Linksys extender in the socket.
- WiFi gadget supports specified web browsers.
Access Login Page Of Linksys Extender
- Initially place the plug of the Linksys extender in the power outlet.
- After that, press the extender power button.
- Next, wait until the power LED starts blinking.
- Grab a WiFi device and connect it to the extender network.
- Now, launch the browser and type extender.linksys.com in the URL bar.
- Fill in the credentials such as username and security password.
- Finally, hit the login button to complete the Linksys extender login process.
Connect Linksys Extender With Router Via WPS
When doing this method process, make sure that your router also supports the WPS button.
- Initially, look for the extender WPS button and press it for a few seconds.
- After pressing the extender WPS button, hit the router WPS button.
- Now, on both the gadgets WPS LED starts blinking solid.
- Thereafter, take out the Linksys extender power plug from the socket.
- In the end, place the extender in that area where you are facing slow internet speed.
Due to any reason, if you are unable to do the Linksys extender configuration process by the WPS button then try another method.
Configure Extender Without WPS Button
You can try this method if you are unable to set up an extender by the WPS button.
- First, place the desktop and WiFi range extender in the same room.
- After that, with the help of an ethernet cable you will need to attach an extender to the computer.
- Now, open the browser on that computer that links with the extender.
- Later, type Linksys extender default IP address or web portal.
- Thereafter, the login page will ask you to fill in the login details.
- Be sure that you are entering the correct information.
- Then, pick the manual option and restart the Linksys extender.
By considering the above steps you can easily do the Linksys wifi range extender setup process without the WPS button.
Troubleshooting Tips To Fix Error
If you are facing an issue in your Linksys extender device after performing the Linksys extender login and configuration process. Then don’t worry, try the below troubleshooting tips to fix the issue.
Locate The Extender At The Central Location:-
The central location of the Linksys extender is best, after the setup process. Make sure that the extender unit is not located closer to the metal or electronic appliances because these types of appliances absorb the wireless signals that come from the extender.
Upgrade Software Of Extender
Sometimes when your extender software is outdated, then the device does misbehave. To update the software of the extender, follow the below steps.
- First, make sure that the WiFi extender is connected to the computer.
- Now, open the browser on a connected gadget and hit extender.linksys.com.
- Fill in the details and click on the login button option.
- Next, look for the network administration option and tap on the software upgrade option.
- In the end, wait a minute to download the software.
Try To Swap Connection Source:-
If you are still facing issues with your Linksys extender device then try to use an ethernet cable to connect your WiFi device. There is nothing wrong with using the cable source to attach a WiFi device, it is not always a reliable option to consider.
Power Cycle Linksys Extender
- First, press the power button and take out the plug of the Linksys extender from a socket.
- After that, wait for a few minutes and place the extender power plug into a socket.
- In the end, press the power button of the extender to turn it on.
Reset All Settings Of An Extender
After trying all the upper solution tips, if you are unable to fix the error then try this last method.
- First, look for the reset button on your extender device.
- After that, take a paper pin and press the reset button.
- Now, all the extender LEDs will be turned off. All turned-off LEDs indicate that the device is completely reset now.
After resetting the settings of the Linksys extender you will need to do the Linksys extender login and setup process.
We hope, after the whole study of this post you will be able to know all the information about your Linksys extender device. If you have any questions in your mind then feel free to contact our technician expert. They will help you and answer your questions.
